Subscribe by Email


Showing posts with label Telecommunication. Show all posts
Showing posts with label Telecommunication. Show all posts

Monday, September 23, 2013

What is meant by Quality of Service provided by network layer?

- The QoS or the quality of service is such a parameter that refers to a number of aspects of computer networks, telephony etc. 
- This parameter allows transportation of traffic as per some specific requirements. 
- Technology has advanced so much now computer networks can also be doubled up as the telephone networks for doing audio conversations. 
- The technology even supports the applications which have strict service demands. 
- The ITU defines the quality of service in telephony. 
It covers all the requirements concerning all the connection’s aspects such as the following:
Ø  Service response time
Ø  Loss
Ø  Signal – to – noise ratio
Ø  Cross – talk
Ø  Echo
Ø  Interrupts
Ø  Frequency response
Ø  Loudness levels etc.  

- The GoS (grade of service) requirement is one subset of the QoS and consists of those aspects of the connection that relate to its coverage as well as capacity. 
- For example, outage probability, maximum blocking probability and so on. 
- In the case of the packet switched telecommunication networks and computer networking, the resource reservation mechanisms come under the concept of traffic engineering. 
- QoS can be defined as the ability by virtue of which the different applications, data flows and users can be provided with different priorities. 
- It is important to have QoS guarantees if the capacity of the network is quite insufficient. 
- For example, voice over IP, IP-TV and so on. 
- All these services are sensitive to delays, have fixed bit rates and have limited capacities.
- The protocol or network supporting the QoS might agree up on some traffic contract with the network node’s reserve capacity and the software. 
- However, the quality of service is not supported by the best effort services. 
-Providing high quality communication over such networks provides a alternative to the QoS control mechanisms that are complex. 
- This happens when the capacity is over-provisioned so much that it becomes sufficient for the peak traffic load that has been expected. 
- Now since the network congestion problems have been eliminated, the QoS mechanisms are also not required. 
- It might be sometimes be taken as the level of the service’s quality i.e., the GoS. 
- For example, low bit error probability, low latency, and high bit rate and so on. 
- QoS can also be defined as a metric that reflects up on the experienced quality of the service.
- It is the cumulative effect that can be accepted. 
Certain types of the network traffic require a defined QoS such as the following:
Ø  Streaming media such as IPTV (internet protocol television), audio over Ethernet, audio over IP etc.
Ø  Voice over IP
Ø  Video conferencing
Ø  Telepresence
Ø  iSCSI, FCoE tec. Storage applications
Ø  safety critical applications
Ø  circuit emulation service
Ø  network operations support systems
Ø  industrial control systems
Ø  online games

- All the above mentioned services are examples of the inelastic services and a certain level of latency and bandwidth is required for them to operate properly. - On the other hand, the opposite kind of services such as the elastic services can work with any level of bandwidth and latency. 
- An example of these type of services is the bulk file transfer application based up on TCP.
- A number of factors affect the quality of service in the packet switched networks. 
- These factors can be broadly classified in to two categories namely technical and the human factors. 
The following factors are counted as the human factors:
Ø  reliability
Ø  scalability
Ø  effectiveness
Ø  maintainability
Ø  grade of service and so on.

- ATM (asynchronous transfer mode) or GSM like voice transmissions in the circuit switched networks have QoS in their core protocol. 


Friday, June 28, 2013

Give advantages of frame relay over a leased phone line?

Frame relay and leased phone lines are two of the physical connection media for setting up the connections. 

Advantages of Frame Relay over Leased Phone Line
- Frame relay is a kind of the standardized WAN (wide area network) technology for specifying the logical link as well as physical link layers of the digital telecommunication channels. 
- It is done by the means of a packet switching methodology.
- The frame relay technology has been designed for transportation across the ISDN (integrated services digital network) infrastructure. 
- Today, it is used in the context of a number of network interfaces. 
- Frame relays are commonly implemented for VoFR (voice over frame relay).  - It is used as an encapsulation technique for the data. 
- The frame relays are used between the WANs and the LANS.
- A private line or a leased line is provided to the user that connects to the frame relay node. 
- The frequently changing path is transparent to the WAN protocols used extensively by the end users. 
- Data is transmitted via these networks and the frame relay network handles all this.
- One advantage of the frame relays over the leased lines is that they are less expensive and this is what that makes the frame relays so popular in the telecommunications industry.
- Another advantage of the frame relays over the leased lines that make them popular is that they have user equipment that can be configured with extreme simplicity in the frame relay network. 
- The usage of the Ethernet over the fiber optics communication is high. 
- This has led to using the frame relay protocol and encapsulation by the dedicated broadband services like DSL and cable modem, VPN, MPLS etc. 
- However, there are a number of rural regions in India where there is still an absence of the cable modem and DSL services.
- In such areas, the only option for the non-dial-up connection is the frame relay line of 64 Kbit/ s.
- Thus, it might be used by some retail chain to connect with the WAN of their corporate. 
- The aim of the designers of the frame relay is to offer a telecommunication service for transmitting the cost efficient data between the various end points in the WAN and the local area networks in an intermittent traffic. 
- The data is put in to units of variable sizes called the frames by the frame relay process. 
- The required error correction process is left up to the end points. 
- This error correction includes re-transmission of the data. 
- This increases the speed of the overall transmission of data. 
- A PVC or the permanent virtual circuit is provided by the network so that when a customer looks at a dedicated connection and not having to pay for leased line that is full time engaged. 
- The route by which each frame travels to the destined end point is figured out by the service provider and thus he decides the charges based up on the usage. 
- A level of the service quality can be selected by the enterprise. 
- The frames can be prioritized while the importance of the other frames is reduced. 
- The frame relay can run on systems such as the following:
Ø  Fractional T – 1
Ø  Full T – carrier
Ø  E – 1
Ø  Full E carrier
- A frame relay provides mid-range services between ATM (asynchronous transfer mode) and the ISDN operating at a speed of 128 Kbps. 
- Not only it provides the services, it also complements them. 
- The base of the frame relay technology is provided by the X.25 packet switching that has been designed for data transmission over the analog voice lines.



Facebook activity