What is the difference between a passive star and an active repeater in fiber optic network?

There are two important components of a fiber optic network namely passive star coupler and active repeaters. 

Passive Star in Fiber Optic Network

- Passive star couplers are single mode fiber optic couplers with reflective properties.  

- These couplers are used for optical local area networking at very high speeds. 

- These couplers are made from very simple components such as mirrors and 3 db couplers. 

- Besides this, these star couplers save a lot of optical fiber when compared to its trans-missive counterpart. 

- They are free of any multi-paths so as to avoid any interference. 

- A fiber optic network may consist of any number of passive star couplers and each of them is capable of connecting a number of users. 

- The input and output from every passive star coupler is given to the output and input of an active coupler. 

- The round trip transmission tile is stored by the active star coupler. 

- When it receives a signal from a passive star coupler, it stops the output to that coupler for the duration of the signal.

- It also inhibits the incoming data from all the other passive star couplers for the round trip transmission delay plus signal duration. 

- The purpose of a star coupler is to take one input signal and then splitting it in to a number of output signals. 

- In telecommunications industry and fiber optics communication, this coupler is used in network applications being a passive optical device. 

- If an input signal is introduced to one of the input ports, it is distributed to all of the output ports of the coupler. 

- As per the construction of the passive star coupler, the number of ports it will have is given by the power of 2. 

- For example, in a two port coupler or in a directional coupler or splitter, there are 2 input ports and 2 output ports.

- In a four port coupler, there are 4 i/p ports and 4 o/p ports and so on. 

- The digital equipment corporation also sold a device by the name of star coupler which was used for interconnecting the links and computers through coaxial cable instead of using optical fibers. 

Active Repeater in Fiber Optic Network 

- Active repeater is an important telecommunications device used for re transmitting the signal it receives to a higher level and with higher basically to the other side of an obstacle so that long distances can be covered. 

- Repeater is an electro-mechanical device that helps in regenerating the telegraphy signals. 

- It may be defined as an analog device for amplifying the input signal, reshaping it, re-timing it for re-transmission. 

- A re-generator is a repeater that can perform the re-timing operation. 

- Repeaters just tend to amplify the physical signal without interpreting the data transmitted by the signal. 

- The 1^st layer i.e., the physical layer is where the repeaters operate. 

- Repeaters are employed for boosting the signals in optical fiber lines as well as in twisted pair and coaxial cables. 

- When a signal travels through a channel, it gets attenuated with the distance and time because of the energy loss (dielectric losses, conductor resistance etc.). 

- When light travels in optical fibers, it scattered and absorbed and hence is attenuated. 

- Therefore, in long fiber lines, repeaters are installed at proper intervals for regenerating and strengthening the signal. 

Repeater in optical communication performs the following functions:

Ø  Takes the input signal

Ø  Converts it in to electrical signal

Ø  Regenerates it.

Ø  Converts it in to optical signal

Ø  Re-transmits it

- These repeaters are usually employed in submarine as well as transcontinental communication cables as the loss is unacceptable in these cases.  

What is meant by Holographic Data Storage?

Currently the conventional magnetic and optical data storage dominates the field of high – capacity data storage. But another technology called the holographic data storage holds the potential to lead this area. Now what is this technology? We shall discuss about it in this article. 

Difference between Conventional storage methods and Holographic Data Storage

- The conventional methods such as the optical storage and magnetic storage technologies depend up on the recording of the individual data bits on the distinct optical and magnetic on the medium’s surface. 

- In the holographic technology, the information is recorded throughout the medium’s volume.

- Multiple images can be recorded in the same medium area via utilization of the light at varying angles. 

- Further, in the conventional storage methods the recording takes place in a linear fashion whereas, 

- In holographic storage, millions of bits can be recorded and read in parallel thus increasing the rates of the data transfer more than what are offered by the conventional methods.

Features of Holographic Data Storage

Data Recording: 

- The information is stored in a thick photosensitive optical substance with the help of an optical interference pattern. 

- A laser beam is divided into two un-identical optical patterns (formed of light and dark pixels) and is projected towards the medium. 

- A multitude of holograms in one volume is recorded by making adjustments in the wavelength, reference beam angle, media position etc.

Data Reading: 

- For reading the stored data, the same reference beam is reproduced for the creation of the hologram. 

- This light beam is focused up on the photosensitive material that illuminates the interference pattern which leads to the diffraction of the light. 

- The pattern is then projected to the detector. 

- The data is then read in parallel at a rate more than that of millions. 

- This means high data transfer rate. 

- It takes less than 0.2 seconds for accessing the information from a holographic drive. 

- Holographic data storage has offered a solution to many companies for preserving and archiving the information. 

- The WORM (write – once, read many) approach provides assurance about the content security, risk of modification and overwriting of the information. 

- This technology provides hope for storage of data without degradation for 50 plus years which is quite more than the current options.

- However, if the same trend is followed, and it becomes possible to store data for 50 – 100 years in same format, that would still be irrelevant. 

- This is so because the format will be changing in less than 10 years.  

Types of Holographic Media

- Holographic media is of two types namely:

1.  The re-writable media and
2. The write once medium.

- In the former type, the changes can be reversed but in the latter can the changes are irreversible.

There is no point in the competition between the holographic storage and the hard drives since the former can find a market that is based up on the virtues like access speed. 

- The holographic data storage technology does seems to have a future in the video game market. 

In the year of 2009, the GE Global Research did came up with their own demonstration of the holographic storage medium that could stand the discs that had read mechanisms somewhat similar to that of the blu–ray disc players.