FTP - File Transfer Protocol

- File Transfer Protocol (FTP), a standard Internet protocol, is the simplest way to exchange files between computers on the Internet.
- FTP is an application protocol that uses the Internets TCP/IP protocols.
- FTP is commonly used to transfer Web page files from their creator to the computer that acts as their server for everyone on the Internet.
- FTP is also commonly used to download programs and other files to your computer from other servers.
- Web browser can also make FTP requests to download programs you select from a Web page.
- FTP can also be used to update (delete, rename, move, and copy) files at a server.
- FTP can be run in active mode or passive mode, which control how the second connection is opened.
- In active mode the client sends the server, the IP address port number, that the client will use for the data connection, and the server opens the connection.
- Passive mode was devised for use where the client is behind a firewall and unable to accept incoming TCP connections.

The objectives of FTP are :
- to promote sharing of files (computer programs and/or data),
- to encourage indirect or implicit (via programs) use of remote computers,
- to shield a user from variations in file storage systems among hosts, and
- to transfer data reliably and efficiently.

Anonymous FTP

Thousands of hosts on the Internet run ftp servers that permit guests to login. Such servers usually contain data and software of interest to the general public. They are often called anonymous ftp servers because the guest login name is anonymous. To login to an anonymous ftp server, enter the name anonymous when prompted for a username or userid. When prompted for a password, enter your full e-mail address, unless the on-screen instructions specify an alternative guest password.

Serial Line Internet Protocol - SLIP protocol

The need for a data link layer protocol to let IP operate over serial links was identified very early on in the development of TCP/IP. To solve the problem they created a very simple protocol that would frame IP data grams for transmission across the serial line. This protocol is called the Serial Line Internet Protocol, or SLIP for short.
SLIP modifies a standard TCP/IP data gram by appending a special "SLIP END" character to it, which distinguishes data gram boundaries in the byte stream. SLIP requires a serial port configuration of 8 data bits, no parity, and either EIA hardware flow control, or CLOCAL mode (3-wire null-modem) UART operation settings.

- Serial Line Interface Protocol (SLIP) is a TCP/IP protocol used for
communication between two machines that are previously configured for communication with each other.
- The dial-up connection to the server is typically on a slower serial line rather than on the parallel or multiplex lines.
- SLIP does not provide error detection, being reliant on other high-layer protocols for this.
- A SLIP connection needs to have its IP address configuration set each time before it is established.
- The Serial Line Internet Protocol (SLIP) is a mostly obsolete encapsulation of the Internet Protocol designed to work over serial ports and modem connections.
- A version of SLIP with header compression is called CSLIP (Compressed SLIP).
- The Parallel Line Internet Protocol (PLIP) is very similar to SLIP, but works at higher speeds via a parallel port.
- SLIP is a STREAMS-based computer networking facility that provides for the transmission and reception of IP packets over serial lines.
- SLIP can be used to connect one host to another via a single, physical serial line connection between serial ports or over longer distances using a modem at each end of a telephone line.