What are uses of WiMax technology?

- The WiMax technology has been used since a long time to provide assistance to the communication process.

- This area has seen major deployment of wimax technology especially in Indonesia during the calamity of tsunami in the year of 2004. 

- The WiMax technology brought in the possibilities of providing broadband access that helped a big deal in regeneration of the communication. 

- The organizations such as FEMA and FCC (federal communications commission) felt the need of wimax in their communication process. 

- The WiMax applications with high efficiency are available today.

- It is known to offer a broad base for the customers and the services had been improved by adding mobility feature to them.

- The service providers use the WiMax technology for providing various services such as mobile and Internet access, voice, video and data. 

There are other advantages of using wimax technology.  

- You get to save a lot of prospective cost and at the same time you get efficiency in services.

- It is even capable of allowing the video making, VOIP calling and data transfers at high speeds.

- The mobile community has been upgraded so much with the coming of the WiMax technology.

- However, there are three main applications offered by WiMax namely backhaul, consumer connectivity and business.

- The real augmentation has been drawn to communications through WiMax technology because of which they can benefit both from the data transmission and video apart from voice. 

- This has facilitated quick response from the applications as per the situation.  

- A temporary communication services can be deployed by a client using WiMax technology.

- It can even speed up the network according to the circumstances and events.  

- This has got us access to visitors, employees and media on a temporary basis.  

- If we are located in the range of the tower, it is quite easy for us to gain access to the equipment of the premises of for the events.

The factors that make the wimax technology so powerful are the following:

> high bandwidth

> high quality services

> security

> deployment

> full duplex consisting of DSL

> reasonable cost

For some applications, the wimax technology is used exclusively as in the following:

1. A means of connecting for the small and medium sized businesses.  - This technology has enabled these businesses to progress day by day.

- The connectivity offered by WiMax technology is good enough to attract clients.  

- It then provides them a number of services such as that of hotspots and so on.  

- Therefore, this application has gotten into spot light.

2. Backhaul

- The most important application of the WiMax technology is the range.

- This is so because using WiMax tower can be used as a means to connect with the other WiMax towers through line-of-sight communication which involves using microwave links. 

- This connectivity between two towers is called as backhaul.  

- It is capable of covering up to 3000 miles. 

- The WiMax network is even sufficient for covering remote and rural areas.

3. The nomadic broadband is another application of wimax technology which can be considered as an extended plan of wifi.

- The access points provided by WiMax technology might be less in number but they offer very high security.  

- Many companies use the WiMax base station for the development of the business.

What is WiMax technology?

Worldwide inter-operability for microwave access or wimax is standard developed for wireless communications that has been designed so as to deliver data rates of 30-40 mbps. The update in the technology in the year 2011 upgraded the technology to provide around 1 gbps for the stations that were fixed. 

- The Wimax forum is responsible for naming the technology as Wimax. 

- This forum was formed in the year of 2001 for the promotion of the inter-operability and conformity of this standard. 

- The Wimax has been defined by the forum as the technology based up on standards that enable the last mile wireless broadband delivery as alternative for the DSL and the cable thing. 

- The IEEE 802/ 16’s interoperability implementations are referred to as the WiMax. 

- The wimax forum has ratified this family of standards. 

- By virtue of the certification provided by this forum, the vendors are able to sell mobile and fixed products that are wimax certified. 

- This is done for ensuring that a level of inter-operability is maintained at par with the other products that have been also certified for the same profile. 

- The ‘fixed wimax’ is the name given to the original IEEE 802.16 standards.

- ‘Wifi on steroids’ is the term used to refer to WiMax sometimes. 

It has got a number of applications such as in:

Ø  Broadband connections

Ø  Cellular back-haul

Ø  Hot spots and so on.

- This technology shares some similarity with the Wifi technology however, this one is more capable of transmitting data at greater distances.

It is because of its range and bandwidth that the WiMax is suitable for the following applications:

Ø  Provides services such as the IPTV services and VoIP (telecommunications services).

Ø  Provides mobile broadband connectivity that is portable across the cities and countries and that can be accessed via different kinds of devices.

Ø  Provides an alternative for DSL and cable in the form of wireless last mile broadband access.

Ø  Acts as a source of internet connectivity.

Ø  Metering and smart grids.

- This technology can be used at home for providing internet access across the countries. 

- This has also caused a rise in the market competition. 

- The WiMax is even economically feasible. 

- Mobile wimax has been used as a replacement for the technologies like CDMA, GSM that are cellular phone technologies.  

- The technology has also been used as an overlay for increasing the capacity.  

- The fixed wimax is now used for 2g, 3g and 4g networks as a wireless back-haul technology in almost all the nations whether they are developed or developing.  

- In some states of North America, this technology is provided through a numbered of copper wire line connections. 

- On the other hand, the technology is back hauled via satellites in case of the remote cellular operations.  

- While in other cases even microwave Links are used. 

- The bandwidth requirements of the WiMAX demand more substantial back-haul when compared to other legacy cellular applications. 

- In some of the cases, the sites have been aggregated by the operators by use of Wireless Technology.  

- The traffic is then introduced to the fiber networks as per the convenience.  

- The technologies that provide triple play services are directed compatible with the WiMAX.  

- These services might include multi-casting and quality of service. 

- WiMax has been widely used for providing assistance in the communications. 

- The Intel Corporation has donated the hardware for WiMax technology for assisting the FCC (federal communications commission) and FEMA etc.

- The subscribers’ stations or SS are the devices which are used for connecting to a WiMAX Network. 

- These devices might be portable such as the following:

      > Handsets and smart phones

      > PC peripheral such as USB dongles, PC Cards and so on. 

      > Embedded devices in notebooks.

What are advantages and limitations of Wi-Fi?

The Wi-Fi has its own set of advantages and limitations. 

Advantages of WiFi

- WiFi makes the deployment of local Area Networks or LANs quite cheap.  

- There are some areas where the cables cannot be installed such as in historical buildings and outdoor areas. 

- But these spaces do not have any problem in hosting a wireless LAN.  

- Wireless Network adapters are being built into almost all the laptops by the manufacturers.

- A basic level of service is provided at which different brands concerning and client network interfaces access points that are competing with each other can inter-operate. 

- The products that have been certified by Wi-Fi alliance show back word compatibility. 

- A standard device for WiFi will work at any place in the whole world unlike our phones. 

- The WPA2 or the WiFi protected access encryption is secure provided a condition that the pass phrase used is quite strong.  

- The new protocols use for WMM i.e., Quality of service increase the suitability of the Wi-Fi regarding its use in latency - sensitive applications. 

- WMM is a power saving mechanism that is used for extending the life of the battery. 

Limitations of WiFi

- Inconsistency of the operation and spectrum assignments poses a problem worldwide.  

- The range all the WiFi networks is limited. 

- A wireless access point typically uses a stock antenna having a range of 100 m outdoors and 25m indoors.

- The frequency band is a major factor for producing variations in the range.  

- The range of Wi-Fi with a 2.4 ghz frequency block is better when compared with the 5.0 ghz frequency block Wi-Fi. 

- Some wireless routers come with detachable antennas. 

- These antennas can be removed for improving the range. 

- In their place upgraded antennas can be fitted. 

- The benefit of these antennas is that they have high directional gain at the remote devices. 

- The local regulations limit the maximum amount of power that can be transmitted by a Wi-Fi. 

- The power consumption of Wi-Fi is quite higher than the other standards.  

- This is so because of the reach requirements of the wireless LAN applications.

- There are technologies available that provide a propagation range that is much shorter. 

- One such technology is Bluetooth and has very low power consumption.  

- Other technologies such as zigbee have low power consumption, a long range but provides low data rate. 

- The most commonly used wireless encryption standard is WEP or wired equivalent privacy. 

- Even this standard has been proven to be breakable even if correct configuration is used. 

- This problem was addressed by WPA or Wi-Fi protected access standard to some extent. 

- By default the wireless access points use the encryption free mode. 

- The wireless security is disabled because of which the LAN can be openly accessed. 

What are uses of Wifi?

- Routers sometimes act as a Wi-Fi access point incorporating a cable modem or a DSL modem.

- These routers are installed in buildings and homes for providing Internet access and other inter networking services to the devices that in turn are connected to a either through a cable or wireless. 

- Similarly, there are routers that are powered by battery and they consist of a Wi-Fi access point and a mobile Internet radio modem. 

- Today smartphones come with this as a built-in capability.  

- However, this feature is disabled by the carriers. 

- The carriers might charge extra money for this. 

- The standalone facilities are provided by Internet packs. 

- The places where there is no network access, wifi is used. 

- Using Wi-Fi, a direct communication link between two computers can be established.  

- There is no intermediate point.  

- This type of transmission is termed as ad hoc wifi transmission. 

- This network mode is now very popular with the multi-player game consoles. Examples are:

       > Nintendo DS

       > PlayStation portable

       > Digital cameras

       > Other consumer electronic devices.

- A citywide Wi-Fi plan has been implemented by a number of the cities around the world.  

- In India, the first city to do so was Mysore.  

- The first city in the world was Jerusalem.

- The first city in United States was Sunnyvale in California to offer city-wide wifi. 

- Another type of wifi implementation is campus-wide wifi.  

- A number of colleges in United States have set up this kind of wifi network.  

- The first university to have it was Carnegie Mellon University. 

- Using wifi, the local area Network can be deployed in very less cost.  

- There are places where it is not possible for the physical transmission medium such as cables to reach. 

- In such places wifi network is of crucial importance.  

- Also, wifi can be easily deployed in historical buildings and outdoor areas.  

- Now, because of the increasing popularity of the Wi-Fi, the manufacturers are developing Wireless Network adapters for most of the notebooks and laptops.  

- This eventually led to a fall in the price of the Wi-Fi chip set. 

- Today, the Wi-Fi chip set is economically feasible and is included in most of the devices.  

- There are many brands of client network interfaces and access-points that are competing with each other.  

- These interfaces are able to inter-operate at a basic level. 

- The Wi-Fi certification for the products is issued by wifi alliance. 

- This makes them backwards compatible with each other. 

- A standard Wi-Fi Device is supposed to work anywhere in the world. 

- The encryption standard that is considered secure is the WPA2 or wifi protected access.  

- But, this would work only if the pass phrase that is being used is strong enough. 

- The Wi-Fi has been made more suitable with the use of new protocols such as quality of service.  

- This has made wifi compatible with latency sensitive applications.  

- Nowadays, for extending battery life power saving mechanisms such as WMM are being used.  

- These are the major uses of wifi technology.

- The usage wifi has been limited because of its limited range. 

- Therefore, in order to cover up a large area several intermediate Wi-Fi access-points have to be set up. 

- The variations in the range can be produced by varying the frequency band.  

- Wifi with a small frequency block works better than wifi with a larger frequency block.

- Wifi with the larger frequency blocks are optionally used. 

- The power of wifi network can be harnessed by using high gain direction antennas instead of using detachable antennas.  

- Another factor limiting the performance of wifi transmission is the local regulations. 

- Wifi also requires high power to operate upon. 

- This is a cause of concern for the devices' batteries.

What is Wifi technology? How does it work?

- Wifi has emerged as a very popular technology. 

- This technology has enabled the electronic devices to exchange information between them and to share the internet connection without using any cables or wires. 

- It is a wireless technology. 

- This technology works with the help of the radio waves. 

- The Wifi is defined as a WLAN (wireless local area network) product by the wifi alliance that is based on the standards defined by IEEE (802.11 standards). 

- Most of the WLANs are based upon these standards only and so this technology has been named as wifi which is the synonymous with the term WLAN. 

- The wifi-certified trademark might be used by only those wifi products which have the complete certification for the wifi alliance inter-operability. 

- A number of devices now use wifi such as the PCs, smart phones, video game consoles, digital cameras, digital audio players, tablet computers and so on. 

- All these devices can connect to the network and access internet by means of a wireless network access point. 

- Such an access point is more commonly known as a ‘hotspot’. 

- The range of an access point is up to 20 m. 

- But it has a much greater range outside.  

- An access point can be installed in a single room or in an area of many square miles. 

- This can be achieved by using a number of overlapping access points. 

- However, the security of the wifi is less compared to the wired connections for example Internet.

- This is so because a physical connection is not required by an intruder. 

- The web pages using SSL have security but the intruders can easily access the non-encrypted files on the internet. 

- It is because of this, that the various encryption technologies have been adopted by the wifi. 

- The earlier WEP encryption was weak and so was easy to break.

- Later, came the higher quality protocols such as the WPA2 and WPA. 

- The WPS or the wifi protected set up was an optional feature that was added in the year of 2007. 

- This option a very serious flaw which is that it allowed the recovery of the password of the router by an attacker.

- The certification and the test plan has been updated by the wifi alliance for ensuring that there is resistance against attacks in all the devices that have been newly certified.

- For connecting to a wifi LAN, a wireless network interface controller has to be incorporated in to the computer system.

- This combination of the interface controller and the computer is often called as the station. 

- The same radio frequency communication channel is shared by all the stations.

- Also, all the stations receive any transmission on this channel. 

- Also, the user is not informed of the fact that the data was delivered to the recipient and so is termed as the ‘best–effort delivery mechanism’. 

- For transmitting the data packets, a carrier wave is used. 

- These data packets are commonly known as the ‘Ethernet frames’. 

- Each station regularly tunes in to the radio frequency channel for picking up the transmissions that are available. 

- A device that is wifi enabled can connect to the network if it lies in the range of the wireless network. 

- One condition is that the network should have been configured for permitting such a connection. 

- For providing coverage in a large area multiple hotspots are required. 

- For example, wireless mesh networks in London. 

- Through wifi, services can be provided in independent businesses, private homes, public spaces, high street chains and so on. 

- These hotspots have been set up either commercially or free of charge. 

- Free hotspots are provided at hotels, restaurants and airports. 

How can firewalls secure a network?

Firewalls in computer systems are either software based or hardware based. But they have the same purpose of keeping a control over the incoming as well as the outgoing traffic. 

In this article we discuss about how the network is secured by the firewalls. 

- This control is maintained through the analyzation of the data packets. 

- After analyzation, the firewall’s work is to determine whether to allow these packets to pass or not. 

- This decision is taken based up on some set of rules.

- With this set of rules, a barrier is established by the firewall between the external network that is not considered as secure and trusted and the internal network which is secure and trusted. 

- Most of the personal computer’s operating systems come with a built-in software based firewall for providing protection against the threats from external networks. 

- Some firewall components might also be installed in the intermediate routers in the network. 

- Also some firewalls have been designed to perform routing as well.

There are different types of firewalls which function differently.This classification of the firewalls is based up on the place where the communication is taking place i.e., whether at the network layer or the application layer.

Packet filters or network layer: 

- Firewalls used at the network layer are often termed as the packet filters. 

- This firewall operates at low level of the protocol stack of the TCP/ IP and so does not allow the packets to pass through it unless they satisfy all the rules. 

- These rules might be defined by the administrator of the firewall. 

- These firewalls can also be classified in to two categories namely the stateless firewalls and the state-ful firewall. 

- The former kind use less memory and operates faster in the simple filters, thus taking less time for filtering. 

- These firewalls are used for filtering the stateless network protocols i.e., the protocols which do not follow the session concept. 

- These firewalls are not capable of making complex decisions based up on the state of the communication. 

- The latter kind maintains the context of the active sessions. 

- This state info is used by these firewalls for speeding up the packet processing. 

- A connection is described using any of the properties such as the UDP or TCP ports, IP addresses and so on. 

- If a match is found between an existing connection and the packet, it is allowed to pass. 

- Today firewalls have capabilities of filtering the packets based up on attributes like IP addresses of source and destination hosts, protocols, originator’s netblock, TTL values and so on.

Application layer Firewalls: 

- Firewalls of this type work on the TCP/ IP stack’s application level. 

- All the packets traveling in and out of the application are intercepted by this firewall. 

- This leads to blocking of the other packets also. 

- Firstly, all the packets are inspected for any malicious content for preventing the outspread of the Trojans and worms. 

- Some additional inspection criteria might be used for adding some extra latency to the packet forwarding. 

- This firewall determines whether a given connection should be accepted by a process. 

- This function is established by the firewalls by hooking themselves in to the socket calls for filtering the connections. 

- These application layer firewalls are then termed as the socket filters.

- There way of working is somewhat similar to the packet filters except that the rules are applied to every process rather than connections. 

- Also, the rules are defined using the prompts for those processes that have not been provided with a connection. 

- These firewalls are implemented in combination with the packet filters.

What are the security problems faced by a network?

Making mistakes concerning the network security is very common. The same mistakes are repeated again and again. These problems cannot be solved without changing our working methods. In this article we discuss about some common security problems that are faced by a network.

ØUsing weak and non-complex passwords for accessing the network: 

- Brute forcing is an old school exploit to which many of the system network administrators are open to. 

- The very famous captcha technology has been implemented for correcting this vulnerability of the network security passwords. 

- In the common captcha, the user is required to type in the digits or the letters that are displayed on the screen in some sort of distorted image. 

- This technology has been designed to prevent the network to be accessed by unwanted internet bots.

- However, this is not as safe as it looks. 

- It just gives a false sense to the network admins for countering the brute forcing. 

- Complex password is the solution for this problem. 

- For creating a complex password, more than seven characters need to be combined with special characters and numbers. 

- Apart from the creation of the complex passwords, a password expiration system has to be implemented. 

- This system is for reminding the users for changing their passwords. 

- Also, care should be taken regarding the reuse of the passwords. 

- Cycling of the passwords should not be allowed.

Ø Using server application or software that is outdated: 

- The patches are released by the companies from time to time for ensuring that the system does not become vulnerable to the various threats. 

- Also, new exploits and threats are posed by the hackers that can harm the network if the patches are not properly used. 

- For ensuring the network administrator is kept informed of the new threats, the software or the applications have to be updated regularly.  

Ø Web cookies: 

- Even though the viruses and malware cannot be introduced in to the network through cookies, these cookies can be tracked by some third party cookies for compiling the records of the browsing histories of the individuals. 

- The cookies that are not encrypted pose a major threat because they make the system vulnerable to the cross site scripting (XSS) attacks, thus putting your privacy at risk. 

- The open cookies can provide access to the cookies with the log-in data which can be used by hackers for intruding in to your systems. 

- The solution to this problem is to use the encrypted cookies along with an encoded expiration time. 

- The admins might ask the users to re-log-in before accessing important network directories.

Ø Plain hashes: 

- Hashing is the technique used for indexing and retrieval purposes in the database. 

- In most of the encryption algorithms, the plain hashes are mostly used. 

- A type of encryption is the salt that might be added to the hashes for making the creation of a look-up table that might assist the brute force or directory attacks extremely difficult or let’s say almost impractical. 

- But this works only when large salt is used. 

- Usually a pre-computed look up table might not be used by the attacker in exploitation of the network. 

- This makes the network security system even more complex.

- So even if the attacker is able to break into your system, he won’t be able to access the information from the database. 

- The encryption key should be kept hidden.

Ø Shared web hosting: 

- This service is used by the websites that reside on one same server. 

- Each site is given its own partition. 

- This is economically feasible for most of the systems. 

- But here if the attacker breaches in to system of one website, he can get into other website’s security systems too.